A Quandary Over Buckles
- Farodel
- Dúnadan
- Posts: 56
- Joined: Fri Aug 07, 2015 1:56 am
- Location: Ithilien (Pittsburgh, PA)
- Contact:
Re: A Quandary Over Buckles
WOW GUYS. I was away for about a week and so much has happened. Fantastic contributions. I may try a few of these options to see what works. There's always another piece to use spare buckles on. For now I'll start with that handmade revolution one, because it's the right shape and I think I can trim the belt down to size suitably. Oh, and it's just s'darn cheap.
Manv, if you happen to get one before I do, I implore you to throw some pictures on here! Thank you, everyone.
I also really like the 3d printed one. It seems like it will be the sturdiest option, too. I might start with some plastic shapeways prints so I can check out a few different things. Reeeally liking these Boromir cloak bits.
Manv, if you happen to get one before I do, I implore you to throw some pictures on here! Thank you, everyone.
I also really like the 3d printed one. It seems like it will be the sturdiest option, too. I might start with some plastic shapeways prints so I can check out a few different things. Reeeally liking these Boromir cloak bits.
"Few now remember them, yet still some go wandering, sons of forgotten kings walking in loneliness, guarding from evil things folk that are heedless."
Re: A Quandary Over Buckles
Yeah, I'm super excited about the stuff he's working up with Shapeways. He actually just posted a new Boromir buckle to his Instagram too, which I think might interest you greatly, but it's not uploaded to Shapeways just yet.
I definitely want to get one of those from Handmade Revolution, but I am holding off on that one for a bit. Luckily, Shockbolt did upload a Strider buckle with the strap bar but not the tongue, so I grabbed one of those. Just a waiting game now. Alas, Shapeways takes ages to produce their metal prints.
I definitely want to get one of those from Handmade Revolution, but I am holding off on that one for a bit. Luckily, Shockbolt did upload a Strider buckle with the strap bar but not the tongue, so I grabbed one of those. Just a waiting game now. Alas, Shapeways takes ages to produce their metal prints.
Maerondir Perianseron, also called “Mickel,” Halfling Friend - Ranger of the Misty Mountains
- Elleth
- êphal ki-*raznahê
- Posts: 2933
- Joined: Wed Nov 03, 2010 5:26 am
- Location: in the Angle; New England
Re: A Quandary Over Buckles
Neat - thank you for the demonstration Greg!
I've been sewing too much to get back to the shapeways file, but soon.
My cloak hood is about done, and I'm still uncertain how to do the closure in front. Poking around some WETA images for inspiration, I was reminded of something Farodel mentioned -
... which I guess is fitting for the characters in the film.
re: the Boromir cloak fittings: I read those as rather regal, going by the size. I wouldn't expect someone not of very high social standing to use pieces so big - but that's just my guess. (frankly, film Gondorian stuff is in a weird place: I never know if I'm looking at a generic Gondorian artifact, or a strictly military one. Would a tradesman in Minas Tirith wear a wing- and-star motif, even if he could afford it? )
I've been sewing too much to get back to the shapeways file, but soon.
My cloak hood is about done, and I'm still uncertain how to do the closure in front. Poking around some WETA images for inspiration, I was reminded of something Farodel mentioned -
Take a look at the fastenings on Faramir's cloak: you can see the're actually BUCKLES, just with no tongue. I think the production team must have just pulled pulled them out of a parts bin from stock Gondorian armor or something, rather than make something custom.Random details like that are astonishingly common in the military history of the real world, re-purposing to save in times of war, or to transition in/out of wartime.
... which I guess is fitting for the characters in the film.
re: the Boromir cloak fittings: I read those as rather regal, going by the size. I wouldn't expect someone not of very high social standing to use pieces so big - but that's just my guess. (frankly, film Gondorian stuff is in a weird place: I never know if I'm looking at a generic Gondorian artifact, or a strictly military one. Would a tradesman in Minas Tirith wear a wing- and-star motif, even if he could afford it? )
Persona: Aerlinneth, Dúnedain of Amon Lendel c. TA 3010.
Re: A Quandary Over Buckles
Also of note! I'm pretty sure the buckles used to fasten the cloak in this picture are in fact the exact same design as the buckle on Aragorn's quiver. Which is interesting, and suggests that the quiver may have come from Gondor originally. We know Aragorn traveled extensively and fought for Gondor as a young man, so this would make sense.
Also, where did you find that lovely picture, Elleth?
Also, where did you find that lovely picture, Elleth?
Maerondir Perianseron, also called “Mickel,” Halfling Friend - Ranger of the Misty Mountains
- Elleth
- êphal ki-*raznahê
- Posts: 2933
- Joined: Wed Nov 03, 2010 5:26 am
- Location: in the Angle; New England
Re: A Quandary Over Buckles
why alley cat scratch of course.
http://www.alleycatscratch.com/lotr/Hum ... Ranger.htm
and they're on Aragorn's quiver you say? That IS interesting. Have an image by any chance?
(effectively the same design is on Boromir's shield strap, but a bit bigger I think)
http://www.alleycatscratch.com/lotr/Hum ... Ranger.htm
and they're on Aragorn's quiver you say? That IS interesting. Have an image by any chance?
(effectively the same design is on Boromir's shield strap, but a bit bigger I think)
Persona: Aerlinneth, Dúnedain of Amon Lendel c. TA 3010.
Re: A Quandary Over Buckles
Hah, of course. I clearly haven't perused the Faramir page enough.
Anyway, here's a somewhat decent pic of the buckle on Strider's quiver. There's also another one at the bottom, attaching the strap to the quiver itself in much the same way as Faramir's cloak clasp works (in that it's being used without a tongue).
Anyway, here's a somewhat decent pic of the buckle on Strider's quiver. There's also another one at the bottom, attaching the strap to the quiver itself in much the same way as Faramir's cloak clasp works (in that it's being used without a tongue).
Maerondir Perianseron, also called “Mickel,” Halfling Friend - Ranger of the Misty Mountains
Re: A Quandary Over Buckles
...Okay, here's a picture of the other buckle at the bottom of the quiver. Definitely Gondorian.
Maerondir Perianseron, also called “Mickel,” Halfling Friend - Ranger of the Misty Mountains
Re: A Quandary Over Buckles
Really great to see those pics. I've a few weta inspire pieces in the works as well. You could almost theorize that the bow and quiver could be a style common to Gondorian huntsman and that he aquired it on his travels there. Could also be a weta ode to Aragorn being "the greatest huntsman and traveller". I really wish those Strider belt buckles came in bronze.
"Lonely men are we, Rangers of the wild, hunters – but hunters ever of the servants of the Enemy."
“My cuts, short or long, don’t go wrong.â€
“My cuts, short or long, don’t go wrong.â€
- Mirimaran
- Thangailhir
- Posts: 2110
- Joined: Tue Jul 01, 2008 5:38 pm
- Location: North Carolina
- Contact:
Re: A Quandary Over Buckles
Aieee! I have never seen the buckle on the back of the quiver! What a great find, and I think it would support that the quiver and bow (which the Weapons and Warfare book says is a cut down Gondorian bow) came from his time there.
Ken
Ken
"Well, what are you waiting for? I am an old man, and have no time for your falter! Come at me, if you will, for I do not sing songs of dastards!"
- Elleth
- êphal ki-*raznahê
- Posts: 2933
- Joined: Wed Nov 03, 2010 5:26 am
- Location: in the Angle; New England
Re: A Quandary Over Buckles
Just a quick update: my shapeways projects are coming along quite well!
I've adapted my belt buckle to handle a tongue better, and have added a tongue. I've got a "final" buckle coming in steel, as well as a couple test pieces of hardware in bronze and a pile of d-rings, tiny buckles, and a long frame quiver buckle in test plastic.
I'll be making them available in steel, bronze and silver to forum members once I'm satisfied the models and prints are up to snuff.
I've adapted my belt buckle to handle a tongue better, and have added a tongue. I've got a "final" buckle coming in steel, as well as a couple test pieces of hardware in bronze and a pile of d-rings, tiny buckles, and a long frame quiver buckle in test plastic.
I'll be making them available in steel, bronze and silver to forum members once I'm satisfied the models and prints are up to snuff.
Persona: Aerlinneth, Dúnedain of Amon Lendel c. TA 3010.
- Kortoso
- Haeropada
- Posts: 822
- Joined: Fri Oct 03, 2014 9:37 pm
- Location: Chiang Mai, Thailand
- Contact:
Re: A Quandary Over Buckles
I would love to get that in bronze for a 1 1/2" belt!
There are no safe paths in this part of the world. Remember you are over the Edge of the Wild now, and in for all sorts of fun wherever you go.
Re: A Quandary Over Buckles
Awesome! Nice progress!
Maerondir Perianseron, also called “Mickel,” Halfling Friend - Ranger of the Misty Mountains
- Elleth
- êphal ki-*raznahê
- Posts: 2933
- Joined: Wed Nov 03, 2010 5:26 am
- Location: in the Angle; New England
Re: A Quandary Over Buckles
Okay, progress!
First, I'm very happy with the belt buckle now. Anyone who wants one, PM me and I'll send you a private link to order one in bronze, brass, steel, etc.*
They also have some "bronze steel" "gold steel" etc which aren't period I'm sure, but are certainly cheaper than ordering in real cast metals.
The one pictured is "matte black steel" - unless you like that pebbly texture, definitely order a "polished" version. I'll have that tongue upcoming as a separate model - probably with a baseplate/washer for the buckle - in the very near future.
I'm also making progress on the small buckles and quiver buckles. The small buckles/d-rings I'm happy with, but need to iron out some issues before Shapeways will let me print them in metal.
The quiver buckles look a little chunky, so I'm refining them some more before offering them. (shown in 1.25" and 1.5" test prints) (Also a good demonstration that simply rescaling a design for a wider strip gets extra chunky: I think every width will need to be designed from scratch to be that size. )
More coming!
* once everything is ironed out, I'll move this to the for sale section. I'm not making a penny off them - they're a gift to the community. All I ask is that you not recast any of these pieces for wider distribution.
First, I'm very happy with the belt buckle now. Anyone who wants one, PM me and I'll send you a private link to order one in bronze, brass, steel, etc.*
They also have some "bronze steel" "gold steel" etc which aren't period I'm sure, but are certainly cheaper than ordering in real cast metals.
The one pictured is "matte black steel" - unless you like that pebbly texture, definitely order a "polished" version. I'll have that tongue upcoming as a separate model - probably with a baseplate/washer for the buckle - in the very near future.
I'm also making progress on the small buckles and quiver buckles. The small buckles/d-rings I'm happy with, but need to iron out some issues before Shapeways will let me print them in metal.
The quiver buckles look a little chunky, so I'm refining them some more before offering them. (shown in 1.25" and 1.5" test prints) (Also a good demonstration that simply rescaling a design for a wider strip gets extra chunky: I think every width will need to be designed from scratch to be that size. )
More coming!
* once everything is ironed out, I'll move this to the for sale section. I'm not making a penny off them - they're a gift to the community. All I ask is that you not recast any of these pieces for wider distribution.
Persona: Aerlinneth, Dúnedain of Amon Lendel c. TA 3010.
- Elleth
- êphal ki-*raznahê
- Posts: 2933
- Joined: Wed Nov 03, 2010 5:26 am
- Location: in the Angle; New England
Re: A Quandary Over Buckles
UPDATE
My quiver hardware and bedroll/needwallet strap buckle frames are complete in bronze, and they look AWESOME.
Shapeways is still having problems with the tongues I made for the latter, but hopefully the last model I uploaded won't get kicked back. We'll see.
Onward!
My quiver hardware and bedroll/needwallet strap buckle frames are complete in bronze, and they look AWESOME.
Shapeways is still having problems with the tongues I made for the latter, but hopefully the last model I uploaded won't get kicked back. We'll see.
Onward!
Persona: Aerlinneth, Dúnedain of Amon Lendel c. TA 3010.
Re: A Quandary Over Buckles
OH MAAAAAAAAAAAAAAAAN THOSE ARE BLOODY GORGEOUS! So exciting!
Maerondir Perianseron, also called “Mickel,” Halfling Friend - Ranger of the Misty Mountains