Pacific Yew "Huntsman" Bow Build-Along

A central place to talk about weapons and armour, as it relates to your kit. This is where you show it of or talk about making it. Discussing the relative merits of types of weapons goes in the WMA section.

Moderators: caedmon, Greg

User avatar
Iodo
Thangailhir
Posts: 2112
Joined: Mon Sep 25, 2017 5:58 pm
Location: North west england UK
Contact:

Re: Pacific Yew "Huntsman" Bow Build-Along

Post by Iodo »

Looks amazing so far :P
Gimli: It's true you don't see many Dwarf-women. And in fact, they are so alike in voice and appearance, that they are often mistaken for Dwarf-men.
Aragorn: It's the beards.
User avatar
Greg
Urush bithî 'nKi ya-nam bawâb
Posts: 4496
Joined: Tue Dec 02, 2008 8:50 pm
Location: Eriador; Central Indiana

Re: Pacific Yew "Huntsman" Bow Build-Along

Post by Greg »

Here we are, finally, at the end of the road. Or, rather, the first road.
Image

Now I’m laying out and adjusting a string from both ends until there’s enough material down that line on both sides for the tapered edges of the eventual bow form. It’s a little tricky because the piece is curved...
Image

...and because I have this one ‘whoops’ I have to dodge. Current placement looks like this will be shaved off when the edges are tapered in.
Image
Now the sword shall come from under the cloak.
User avatar
Elendur Amloth
Wanderer
Posts: 46
Joined: Sun Aug 26, 2018 6:51 pm
Location: near Savannah, Georgia
Contact:

Re: Pacific Yew "Huntsman" Bow Build-Along

Post by Elendur Amloth »

Great attention to detail. Looking forward to seeing the finished product and I know you will be proud!
'I would see the White Tree in flower again in the courts of the kings, and the Silver Crown return, and Minas Tirith in peace. Minas Anor as of old, full of light, high and fair, beautiful as a queen among other queens, not a mistress of many slaves.'
User avatar
Greg
Urush bithî 'nKi ya-nam bawâb
Posts: 4496
Joined: Tue Dec 02, 2008 8:50 pm
Location: Eriador; Central Indiana

Re: Pacific Yew "Huntsman" Bow Build-Along

Post by Greg »

I got my centerline marked in with string earlier this week, and marked in a grip-at-center and tip width straddling that centerline. Now I’ve got some glue setting on another project and can do some side tapering. It always amazes he how precisely one can work to an exact line using hand tools. I. Love. My. Plane.

Image
Now the sword shall come from under the cloak.
User avatar
Greg
Urush bithî 'nKi ya-nam bawâb
Posts: 4496
Joined: Tue Dec 02, 2008 8:50 pm
Location: Eriador; Central Indiana

Re: Pacific Yew "Huntsman" Bow Build-Along

Post by Greg »

Between planing on a few other pieces I’m not at liberty to share about, I got some significant shaping done on this guy. We’re taking the belly in and tapering towards the ends. At present, it has the SHAPE, at least, of a bow. Need to thin the center a bit more to get it bending there since this will have to be tillered full-compass, given how short the overall bow is. Still...it’s nice to finally be scraping away at something that looks like something other than a chunk of wood.

Image
Image
Now the sword shall come from under the cloak.
User avatar
Iodo
Thangailhir
Posts: 2112
Joined: Mon Sep 25, 2017 5:58 pm
Location: North west england UK
Contact:

Re: Pacific Yew "Huntsman" Bow Build-Along

Post by Iodo »

Nice work, It's looking good :)
Gimli: It's true you don't see many Dwarf-women. And in fact, they are so alike in voice and appearance, that they are often mistaken for Dwarf-men.
Aragorn: It's the beards.
User avatar
Greg
Urush bithî 'nKi ya-nam bawâb
Posts: 4496
Joined: Tue Dec 02, 2008 8:50 pm
Location: Eriador; Central Indiana

Re: Pacific Yew "Huntsman" Bow Build-Along

Post by Greg »

Got her on the stick a few weeks ago:
FB_IMG_1542907843684.jpg
FB_IMG_1542907843684.jpg (125.59 KiB) Viewed 16225 times
FB_IMG_1542907849664.jpg
FB_IMG_1542907849664.jpg (121.57 KiB) Viewed 16225 times
Yesterday, the real progress happened. My goal was to hopefully get to 24" without an explosion.

Image

THAT, right there, is a conservatively 26" full draw.

On to nocks, and finishing!
Now the sword shall come from under the cloak.
User avatar
Ursus
Amrod Rhandir
Posts: 538
Joined: Sat Jun 22, 2013 11:31 pm
Location: Illinois

Re: Pacific Yew "Huntsman" Bow Build-Along

Post by Ursus »

Very fine work. What’s it pulling poundage wise?
"Lonely men are we, Rangers of the wild, hunters – but hunters ever of the servants of the Enemy."

“My cuts, short or long, don’t go wrong.”
User avatar
Greg
Urush bithî 'nKi ya-nam bawâb
Posts: 4496
Joined: Tue Dec 02, 2008 8:50 pm
Location: Eriador; Central Indiana

Re: Pacific Yew "Huntsman" Bow Build-Along

Post by Greg »

Haven't gotten it on a scale yet, but it's shooting ash shafts spined at 55# like lasers, so that's my ballpark.

Yes, I went ahead and shot it. 10" group at 20 yards after not shooting regularly for, oh, I don't know...a year? Form's imperfect, but the little bow's doing its job and it didn't blow up. Flight is fast and flat...couldn't be more pleased.
Now the sword shall come from under the cloak.
User avatar
Iodo
Thangailhir
Posts: 2112
Joined: Mon Sep 25, 2017 5:58 pm
Location: North west england UK
Contact:

Re: Pacific Yew "Huntsman" Bow Build-Along

Post by Iodo »

That's Amazing! Nice work :P
Gimli: It's true you don't see many Dwarf-women. And in fact, they are so alike in voice and appearance, that they are often mistaken for Dwarf-men.
Aragorn: It's the beards.
User avatar
Ursus
Amrod Rhandir
Posts: 538
Joined: Sat Jun 22, 2013 11:31 pm
Location: Illinois

Re: Pacific Yew "Huntsman" Bow Build-Along

Post by Ursus »

Greg wrote:Yes, I went ahead and shot it. 10" group at 20 yards after not shooting regularly for, oh, I don't know...a year?

I swear yew staves shoot smoother than any other other wood.

I can sympathize, indeed I’d be doing well to get a 10” grouping at this point. Its typically not until I’ve emptied my bag two or three times that I get dialed in.
"Lonely men are we, Rangers of the wild, hunters – but hunters ever of the servants of the Enemy."

“My cuts, short or long, don’t go wrong.”
User avatar
Greg
Urush bithî 'nKi ya-nam bawâb
Posts: 4496
Joined: Tue Dec 02, 2008 8:50 pm
Location: Eriador; Central Indiana

Re: Pacific Yew "Huntsman" Bow Build-Along

Post by Greg »

Ursus wrote:
Greg wrote: I swear yew staves shoot smoother than any other other wood.
This sucker feels smoother in draw and release than my glass laminated recurve. I'm in heaven.
Now the sword shall come from under the cloak.
User avatar
Greg
Urush bithî 'nKi ya-nam bawâb
Posts: 4496
Joined: Tue Dec 02, 2008 8:50 pm
Location: Eriador; Central Indiana

Re: Pacific Yew "Huntsman" Bow Build-Along

Post by Greg »

This week, we're taking the plunge and filing off the perfectly good ends of a functional bow and rolling the dice again to fit horn nocks. I seriously debated gluing on tip overlays instead of tapering the ends like this, but it's been done this way for nearly a thousand years...guess I oughta try.
FB_IMG_1543190219853.jpg
FB_IMG_1543190219853.jpg (13.22 KiB) Viewed 16018 times
FB_IMG_1543190216828.jpg
FB_IMG_1543190216828.jpg (15.28 KiB) Viewed 16018 times
FB_IMG_1543190211510.jpg
FB_IMG_1543190211510.jpg (13.97 KiB) Viewed 16018 times
The black junk on the tapered tip is sharpie marker...I colored in the inside of the drilled horn and spun it around on the tip, filing off what wood was marked until it was marked all the way around for a snug fit.
Now the sword shall come from under the cloak.
User avatar
Elleth
êphal ki-*raznahê
Posts: 2932
Joined: Wed Nov 03, 2010 5:26 am
Location: in the Angle; New England

Re: Pacific Yew "Huntsman" Bow Build-Along

Post by Elleth »

All that looks fantastic!

I love it when a long-time project is finally nearing completion: and this is such a grand one! Very cool. :)
Persona: Aerlinneth, Dúnedain of Amon Lendel c. TA 3010.
User avatar
Greg
Urush bithî 'nKi ya-nam bawâb
Posts: 4496
Joined: Tue Dec 02, 2008 8:50 pm
Location: Eriador; Central Indiana

Re: Pacific Yew "Huntsman" Bow Build-Along

Post by Greg »

Very much nearing completion. I cranked out these horn nocks today, and am mildly perturbed that I put the brownish one on the bottom. My logic was that it'd be getting stuck in the dirt more often than not, because, you know...brown...but then I liked how it turned out much better than the black one, which is on top. Oh well.

All in all, for my first ever pair of horn nocks, which were shaped in a single afternoon, I'm over-the-moon happy that they stayed on and I can still draw the bow without it exploding.

Image

Image
Now the sword shall come from under the cloak.
Post Reply