Erebor Axe
Erebor Axe
Well, since everyone is posting axes...
Here's one I'm working on. I'm calling it the Erebor Axe, and it came from me wondering if I could adapt a Galloglass Axe to a single handed thrower. Since it's fundamentally ahistorical, I figured I'd spruce it up Hobbit style.
It's a grind down/weld up from a crappy Darksword axe I bought years ago. (Don't judge me!)
The inked decoration will be copper inlay when/if I can figure out how to do that.
Here's one I'm working on. I'm calling it the Erebor Axe, and it came from me wondering if I could adapt a Galloglass Axe to a single handed thrower. Since it's fundamentally ahistorical, I figured I'd spruce it up Hobbit style.
It's a grind down/weld up from a crappy Darksword axe I bought years ago. (Don't judge me!)
The inked decoration will be copper inlay when/if I can figure out how to do that.
-Jack Horner
----------------------------
Impression: Cædmon Reedmace | bronze founder living in Archet, Breeland. c. 3017
----------------------------
Impression: Cædmon Reedmace | bronze founder living in Archet, Breeland. c. 3017
Re: Erebor Axe
Well it's coming along very nicely Caed.. looking good!!
“From the ashes a fire shall be woken, A light from the shadows shall spring; Renewed shall be blade that was broken, The crownless again shall be king.â€
http://www.mackermakkeep.com
http://www.mackermakkeep.com
Re: Erebor Axe
I have been drawn lately to the Gallowglass style and have seen a few examples that I really like.
The ones with the high dorsal horn look like they would be devastating fighters in the style I have studied and trained in.
Having the ability to hook, cut and thrust, makes an axe all the more versityle and useful a weapon.
That one looks very nice, I look forward to seeing what you are going to do with it!
The ones with the high dorsal horn look like they would be devastating fighters in the style I have studied and trained in.
Having the ability to hook, cut and thrust, makes an axe all the more versityle and useful a weapon.
That one looks very nice, I look forward to seeing what you are going to do with it!
Last edited by Ringulf on Tue Sep 20, 2016 1:05 am, edited 1 time in total.
I am Ringulf the Dwarven Woodsman, I craft leather, wood, metal, and clay,
I throw axes, seaxes, and pointy sticks, And I fire my bow through the day.
Come be my ally, lift up your mead! We'll search out our foes and the Eagles we'll feed!
I throw axes, seaxes, and pointy sticks, And I fire my bow through the day.
Come be my ally, lift up your mead! We'll search out our foes and the Eagles we'll feed!
- Peter Remling
- Athel Dunedain
- Posts: 3735
- Joined: Sat Feb 16, 2008 4:20 am
Re: Erebor Axe
Looking good.
Instead of copper inlay, how about darking it then doing the inlay in nickel silver. YOu can get the inlay wire in many black powder online sites.
Instead of copper inlay, how about darking it then doing the inlay in nickel silver. YOu can get the inlay wire in many black powder online sites.
-
- Silent Watcher over the Peaceful Lands
- Posts: 124
- Joined: Thu Jan 26, 2012 2:18 am
- Location: Harmony, N.C.
Re: Erebor Axe
Peter Remling wrote:Looking good.
Instead of copper inlay, how about darking it then doing the inlay in nickel silver. YOu can get the inlay wire in many black powder online sites.
Heck yeah, that's a good idea. And fairly cheap too.
If it be a sin to covet honor,I am the most offending soul alive.
- W. Shakespeare
- W. Shakespeare
Re: Erebor Axe
My plan is to darken, and the reason I was going for copper is entirely aesthetic. I like copper.
As for ease of use/cost, is there anything that makes German silver easier to use than copper for inlay?
As for ease of use/cost, is there anything that makes German silver easier to use than copper for inlay?
-Jack Horner
----------------------------
Impression: Cædmon Reedmace | bronze founder living in Archet, Breeland. c. 3017
----------------------------
Impression: Cædmon Reedmace | bronze founder living in Archet, Breeland. c. 3017
- Peter Remling
- Athel Dunedain
- Posts: 3735
- Joined: Sat Feb 16, 2008 4:20 am
Re: Erebor Axe
The inlay wire is designed wedge shaped so the pointed end goes into the carving and you hammer on the wider side. I havn't seen copper wire desined specifically for this purpose but then again, I never looked.caedmon wrote:My plan is to darken, and the reason I was going for copper is entirely aesthetic. I like copper.
As for ease of use/cost, is there anything that makes German silver easier to use than copper for inlay?
Good Luck either way and don't forget pictures.
Re: Erebor Axe
Yes, this is really how slowly I work.
The axe is nearing completion. I have still not successfully engraved, so I finally chose to etch instead. Here's a teaser. My 12 year old is my trusty Naugrim standin.
The axe is nearing completion. I have still not successfully engraved, so I finally chose to etch instead. Here's a teaser. My 12 year old is my trusty Naugrim standin.
-Jack Horner
----------------------------
Impression: Cædmon Reedmace | bronze founder living in Archet, Breeland. c. 3017
----------------------------
Impression: Cædmon Reedmace | bronze founder living in Archet, Breeland. c. 3017
Re: Erebor Axe
Very nice Jack and your son cuts quite a rakish swath as a Naugrim warrior, I must say! His Lamellar is very nice and the targ looks great as well, altogether very impressive!
I am Ringulf the Dwarven Woodsman, I craft leather, wood, metal, and clay,
I throw axes, seaxes, and pointy sticks, And I fire my bow through the day.
Come be my ally, lift up your mead! We'll search out our foes and the Eagles we'll feed!
I throw axes, seaxes, and pointy sticks, And I fire my bow through the day.
Come be my ally, lift up your mead! We'll search out our foes and the Eagles we'll feed!
Re: Erebor Axe
I have long felt that this style of axe with its long dorsal "horn" is very well suited for a thrower as the aggressive dorsal horn loves to stick hard when trying to achieve that all important 45 degree angle to the target.caedmon wrote:Well, since everyone is posting axes...
Here's one I'm working on. I'm calling it the Erebor Axe, and it came from me wondering if I could adapt a Galloglass Axe to a single handed thrower. Since it's fundamentally ahistorical, I figured I'd spruce it up Hobbit style.
It's a grind down/weld up from a crappy Darksword axe I bought years ago. (Don't judge me!)
The inked decoration will be copper inlay when/if I can figure out how to do that.
gallowglas.jpg
When using it one handed as suggested by the picture of this fine "Beardling" warrior, it adds the very important lunge or stab as an optional surprise in your list of loving strokes! (one of the last things an opponent will be looking for from an axe fighter!)
BTW I love the combination of the Dwarven Erebor mountain with the Norse styled Varangian raven. Not only is it eminently appropriate, it marries the Dwarf and Norse styles together in one piece and acts as a "Rosetta Stone" for my Dwarf interpretation! Thank you for the president!
I am Ringulf the Dwarven Woodsman, I craft leather, wood, metal, and clay,
I throw axes, seaxes, and pointy sticks, And I fire my bow through the day.
Come be my ally, lift up your mead! We'll search out our foes and the Eagles we'll feed!
I throw axes, seaxes, and pointy sticks, And I fire my bow through the day.
Come be my ally, lift up your mead! We'll search out our foes and the Eagles we'll feed!