Page 2 of 3

Re: Stormbringer knife

Posted: Tue Mar 07, 2023 11:15 pm
by Taylor Steiner
Cool thanks guys! Stuff to think about :P

Re: Stormbringer knife

Posted: Thu Mar 09, 2023 7:39 am
by Taylor Steiner
I think I've got what I would like on this blade.
The lands my family own in East Glacier MT is called Windridge Ranch. We used to have retreats for advanced stage cancer patients. So I was thinking "Windridge Brother"
The Sindarin I came up with was "Gwaepind Hanar"
Did I get it right?
I still need to figure out the scripting for it.
What do you guys think?

Re: Stormbringer knife

Posted: Thu Mar 09, 2023 11:31 am
by Elleth
I love it! I'll double check today, but at first glance that looks good. You can a tengwar transciption here -

https://www.tecendil.com/
(two notes on this - one, be aware the extra lines on the initial characters in the "Telcontar" font are an aesthetic doubling like you might see in an old black letter document - they're not part of the characters proper. two, I'm not certain that "ae" is handled right, there might (might!) be a special character for the merged vowel there. I'd have to look. Again, sorry, it's been forever and a day)

Re: Stormbringer knife

Posted: Thu Mar 09, 2023 1:03 pm
by Taylor Steiner
Awesome! Thanks Elleth!
Here's what I could find
https://i.imgur.com/9MlmM1n.jpeg
For some reason my phone wont load the link you gave me :(

Re: Stormbringer knife

Posted: Thu Mar 09, 2023 5:07 pm
by Cimrandir
Asking around, someone recommended this translation.
I'd say *hanar Gwaebind* "(a) brother of Wind-ridge."
And I like Glǽmscribe for translation into Tengwar.

https://glaemscrafu.jrrvf.com/english/glaemscribe.html

Re: Stormbringer knife

Posted: Thu Mar 09, 2023 6:11 pm
by Elleth
I did find a special character (set of characters, really) for "ae" in the Gondorian mode, p17 of this document:
https://ia804508.us.archive.org/35/item ... xtbook.pdf


It's also shown on the site Cimrandir linked if you select "Sindarin Tengwar (General use)" mode - which is probably what you want.

Re: Stormbringer knife

Posted: Thu Mar 09, 2023 7:41 pm
by Taylor Steiner
Is it gwaepind or gwaebind? This is what I got for hanar gwaebind as Cimrandir suggested https://i.imgur.com/UEnqGkv.jpeg
And here's gwaepind
https://i.imgur.com/ZivJZs2.jpeg

Re: Stormbringer knife

Posted: Thu Mar 09, 2023 8:01 pm
by Cimrandir
I can claim no expertise in Sindarin. I know only what the users on the Sindarin Discord offered. I’d imagine the p becomes a b through some sort of mutation or another. Honestly, there’s enough mis-spellings in real-world engravings, I can quite easily see some poor Bree smith not understanding the strange Elvish tongue and writing the wrong thing.

Re: Stormbringer knife

Posted: Thu Mar 09, 2023 8:24 pm
by Taylor Steiner
Lol awesome! Those discord guys probably know. I have zero experience too lol

Re: Stormbringer knife

Posted: Thu Mar 09, 2023 9:19 pm
by Elleth
Hunh. Gwaebind does roll off the tongue easier, though I can't right off find something speaking to that particular case. I can check in my books if you don't get a solid answer for your Discord people, but I imagine anyone on a discord dedicated to Sindarin is going to be the better judge. :mrgreen:

And aaaaahh - okay, now I see what's going on with the mark above the first letter. It's for the "Labialized Consonant" which is similar to but not identical with the line over a character than means "preceding N sound." Got it.
So yeah, the tengwar you're getting looks right. Just be sure to blow it up nice and big for your smith, 'cause some of those squiggles mean different things if they're not carved right. :)

Re: Stormbringer knife

Posted: Thu Mar 09, 2023 9:30 pm
by Taylor Steiner
Right on thank you Elleth! Now I just have a five week wait until it arrives. I'm excited :P

Re: Stormbringer knife

Posted: Mon Mar 13, 2023 6:49 am
by Iodo
That looks like it will be really cool, I can't wait to see it :P

Re: Stormbringer knife

Posted: Fri May 05, 2023 12:17 am
by Taylor Steiner

Re: Stormbringer knife

Posted: Fri May 05, 2023 6:35 pm
by ForgeCorvus
Cutting time!!

Re: Stormbringer knife

Posted: Fri May 05, 2023 8:01 pm
by Taylor Steiner
Yes Sir! I gotta get it sharpened. It's pretty dull.